Parrot Bebop v1, Linux bootup
Jan 1 00:00:03 (none) syslog.info syslogd started: BusyBox v1.20.2
Jan 1 00:00:03 (none) user.info rcS: rcS init script ...
Jan 1 00:00:04 (none) user.info rcS_BLDC: rcS_BLDC init script
Jan 1 00:00:04 (none) user.info rcS_BLDC: Start bootloading BLDC firmware
Jan 1 00:00:06 (none) user.info rcS_BLDC: *** BLDC Host Bootloader ***
Jan 1 00:00:06 (none) user.info rcS_BLDC: I found no BLDC firmware to flash. It's been already bootloaded. Check integrity of BLDC flash:
Jan 1 00:00:06 (none) user.info rcS_BLDC: BLDCBtldr_VerifyApplication: 0
Jan 1 00:00:06 (none) user.info rcS_BLDC: ===> no flash corruptions detected !
Jan 1 00:00:06 (none) user.info rcS_BLDC: Send the 'End Bootloader Operation' message
Jan 1 00:00:06 (none) user.info rcS_BLDC: Check if the new flashed firmware is a valid BLC firmware
Jan 1 00:00:06 (none) user.info rcS_BLDC: ==> New BLDC firmware 1:21:R:4
Jan 1 00:00:06 (none) user.info rcS_BLDC: Rename BLDC firmware file done !
Jan 1 00:00:06 (none) user.info rcS_BLDC: *** BLDC Host Bootloader finished with error code 0 ***
Jan 1 00:00:06 (none) user.info rcS_BLDC: 0
Jan 1 00:00:06 (none) user.info rcS_BLDC: End bootloading BLDC firmware
Jan 1 00:00:06 (none) user.notice rcS_BLDC: Battery voltage is ok.
Jan 1 00:00:06 (none) user.info rcS_BLDC: rcS_BLDC init script done
Jan 1 00:00:06 (none) user.info rcS: Groups and priorities
Jan 1 00:00:06 (none) user.info rcS: Mounting NAND Flash
Jan 1 00:00:07 (none) user.info rcS: Serial number : PI040338AA4K002732
Jan 1 00:00:07 (none) user.info rcS: Product name : BebopDrone-K002732
Jan 1 00:00:07 (none) user.info rcS: Start udev
Jan 1 00:00:07 (none) user.info broadcom_setup.sh: (insmod) : CURRENT_TTY = /dev/console
Jan 1 00:00:07 (none) user.info broadcom_setup.sh: Load Modules :
Jan 1 00:00:07 (none) daemon.err ujuba_firmware[232]: Could not find firmware 'brcm/bcm43526-ffff-ffff.nvm' in '/lib/firmware'
Jan 1 00:00:07 (none) daemon.err ujuba_firmware[232]: Could not find firmware 'brcm/bcm43526-ffff-ffff.nvm' in '/lib/firmware/3.4.11'
Jan 1 00:00:07 (none) daemon.err ujuba_firmware[232]: Failed finding firmware 'brcm/bcm43526-ffff-ffff.nvm'
Jan 1 00:00:07 (none) daemon.err ujuba_firmware[232]: Failed loading firmware 'brcm/bcm43526-ffff-ffff.nvm'
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: WIFI BCM NEW STATE : WIFI_BCM_DRIVER_LOADED
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: (create_net_interface) : CURRENT_TTY = /dev/console
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Create Access Point :
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Disable Roaming
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set STBC mode
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set Core Chains
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set Retries
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set Bandwidth
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Disable Aggregation
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set Fragmentation
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set DTIM period
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Set MAC address A0:14:3D:50:D7:FB
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Use BCM autocountry
Jan 1 00:00:08 (none) user.info broadcom_setup.sh: Scanning...
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: => NEW_COUNTRY : AU
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: The actual country is AU/0
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: The actual power is:TxPower is 127 qdbm, 31.75 dbm, 1496 mW Override is Off
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Start AP...
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Mode 2.4 GHz
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Chanspec set to 0x1006
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Chanspec set to 0x1003
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Set Datarates MCS[0-7] + 6 legacy
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Setting SSID to BebopDrone-K002732
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Setting SSID: "BebopDrone-K002732"
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Disable RTS/CTS
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: gmode_protection
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Get G protection mode. (0=disabled, 1=enabled)
Jan 1 00:00:11 (none) user.info broadcom_setup.sh: Set Long Guard Interval
Jan 1 00:00:12 (none) user.info broadcom_setup.sh: Up BCM interface...
Jan 1 00:00:12 (none) user.info broadcom_setup.sh: Starting server...
Jan 1 00:00:12 (none) user.info broadcom_setup.sh: WIFI BCM OK
Jan 1 00:00:12 (none) user.info broadcom_setup.sh: WIFI BCM NEW STATE : WIFI_BCM_ACCESS_POINT_OK
Jan 1 00:00:12 (none) user.info rcS: Start ujubaclient
Jan 1 00:00:12 (none) user.info rcS_video: rcS_video init script...
Jan 1 00:00:12 (none) user.info rcS_video: Enable Video
Jan 1 00:00:12 (none) user.info rcS_video: rcS_video init script done
Jan 1 00:00:12 (none) user.info rcS_vision: rcS_vision init script...
Jan 1 00:00:12 (none) user.info rcS_vision: Enable Vision
Jan 1 00:00:12 (none) user.info rcS_vision: rcS_vision init script done
Jan 1 00:00:12 (none) user.info rcS_IO: rcS_IO init script...
Jan 1 00:00:12 (none) user.info rcS_IO: Enable IO
Jan 1 00:00:12 (none) user.info rcS_IO: rcS_IO init script done
Jan 1 00:00:12 (none) user.info rcS: Loading modules
Jan 1 00:00:12 (none) user.info rcS_eMMC: rcS_eMMC init script ...
Jan 1 00:00:12 (none) user.info eMMC_connect: Connecting eMMC...
Jan 1 00:00:12 (none) user.info eMMC_wait: eMMC device ready.
Jan 1 00:00:12 (none) user.info eMMC_check_fs: Checking eMMC file-system...
Jan 1 00:00:12 (none) user.info eMMC_check_clean: Checking eMMC...
Jan 1 00:00:13 (none) user.err eMMC_check_clean: Warning: eMMC filesystem not clean (dumpe2fs).
Jan 1 00:00:13 (none) user.info eMMC_repair: Repairing eMMC...
Jan 1 00:00:13 (none) user.info eMMC_repair: e2fsck 1.42.11 (09-Jul-2014)
Jan 1 00:00:13 (none) user.info eMMC_repair: BEBOPDRONE was not cleanly unmounted, check forced.
Jan 1 00:00:13 (none) user.info eMMC_repair: Pass 1: Checking inodes, blocks, and sizes
Jan 1 00:00:13 (none) user.info eMMC_repair: Pass 2: Checking directory structure
Jan 1 00:00:13 (none) user.info eMMC_repair: Pass 3: Checking directory connectivity
Jan 1 00:00:13 (none) user.info eMMC_repair: Pass 4: Checking reference counts
Jan 1 00:00:13 (none) user.info eMMC_repair: Pass 5: Checking group summary information
Jan 1 00:00:13 (none) user.info eMMC_repair: BEBOPDRONE: 30/477664 files (6.7% non-contiguous), 34278/1908736 blocks
Jan 1 00:00:14 (none) user.info eMMC_checktuning: Check tuning of eMMC...
Jan 1 00:00:14 (none) user.info eMMC_mount: Mounting eMMC...
Jan 1 00:00:14 (none) user.notice eMMC_mount: eMMC available
Jan 1 00:00:14 (none) user.info rcS_eMMC: rcS_eMMC init script done
Jan 1 00:00:14 BebopDrone-K002732 syslog.info syslogd started: BusyBox v1.20.2
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_gps: rcS_gps init script...
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_gps: GPS uses /dev/ttyPA1
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_gps: rcS_gps init script done
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_usbmode: rcS_usbmode init script...
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_usbmode: USB: Hardware is HW08 or newer; usb_mode is used
Jan 1 00:00:14 BebopDrone-K002732 user.info MTP: starting service
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS_usbmode: rcS_usbmode init script done
Jan 1 00:00:14 BebopDrone-K002732 user.info rcS: Start Avahi daemon
Jan 1 00:00:14 BebopDrone-K002732 daemon.info avahi-daemon[598]: avahi-daemon 0.6.29 starting up.
Jan 1 00:00:14 BebopDrone-K002732 daemon.info avahi-daemon[598]: No service file found in /etc/avahi/services.
Jan 1 00:00:14 BebopDrone-K002732 daemon.info avahi-daemon[598]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::a214:3dff:fe50:d7fb.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: New relevant interface eth0.IPv6 for mDNS.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.42.1.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: New relevant interface eth0.IPv4 for mDNS.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Network interface enumeration completed.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Registering new address record for fe80::a214:3dff:fe50:d7fb on eth0.IPv6.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Registering new address record for 192.168.42.1 on eth0.*.
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Registering HINFO record with values 'ARMV7L'/'LINUX'.
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS_gpu: rcS gpu init script...
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS_gpu: rcS gpu init script done
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: Change spi1 thread priority to real time
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: pid 488's current scheduling policy: SCHED_OTHER
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: pid 488's current scheduling priority: 0
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: pid 488's new scheduling policy: SCHED_FIFO
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: pid 488's new scheduling priority: 99
Jan 1 00:00:15 BebopDrone-K002732 user.info Debug: Debug files go into archive /data/ftp/internal_000/Debug/archive/debug_01.tar.lzo
Jan 1 00:00:15 BebopDrone-K002732 user.info Debug: Setting debug
Jan 1 00:00:15 BebopDrone-K002732 user.info Debug: Redirecting syslog messages to CKCM
Jan 1 00:00:15 BebopDrone-K002732 user.info Debug: CKCM traces go into file /data/ftp/internal_000/Debug/current/ckcm/ckcm.bin
Jan 1 00:00:15 BebopDrone-K002732 user.info Debug: Debug is set
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: Check Update
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: Stop music
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS: Process Update
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS_eeprom: Check the content of the camera EEPROM
Jan 1 00:00:15 BebopDrone-K002732 user.info rcS_eeprom: Camera EEPROM header OK - checking whole content
Jan 1 00:00:15 BebopDrone-K002732 daemon.info avahi-daemon[598]: Server startup complete. Host name is BebopDrone-K002732.local. Local service cookie is 3283749568.
Jan 1 00:00:16 BebopDrone-K002732 user.warn rcS_eeprom: Warning: Camera EEPROM contains invalid data.
Jan 1 00:00:16 BebopDrone-K002732 user.info rcS: Launching Dragon
Jan 1 00:00:16 BebopDrone-K002732 user.info Dragon: Exec : //usr/bin/dragon-prog
Jan 1 00:00:16 BebopDrone-K002732 user.info Dragon: (output send to /dev/null)
Jan 1 00:00:17 BebopDrone-K002732 user.info rcS: rcS init script done
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: klogd started: BusyBox v1.20.2 (2015-07-01 15:57:53 CEST)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Booting Linux on physical CPU 0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] Linux version 3.4.11 (jenkins@fr-pm-intc11-prd) (gcc version 4.6.3 (Sourcery CodeBench Lite 2012.03-57) ) #1 SMP PREEMPT Wed Jul 1 15:57:53 CEST 2015
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.000000] CPU: ARMv7 Processor [412fc097] revision 7 (ARMv7), cr=10c53c7d
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.000000] Machine: Mykonos3 board
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] P7 per device DMA memory regions:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] 9ff00000:9fffffff: ramoops.0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] 94f00000:9fefffff: hx280-venc.0
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] On node 0 totalpages: 85760
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c05e6c00, node_mem_map c0670000
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] Normal zone: 1152 pages used for memmap
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] Normal zone: 84608 pages, LIFO batch:15
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0af5000 s6016 r8192 d14464 u32768
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] pcpu-alloc: s6016 r8192 d14464 u32768 alloc=8*4096
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 84608
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] Kernel command line: mtdparts=nand0:8M(Pbootloader),16M(Pmain_boot),8M(Pfactory),50M(Psystem),46M(Pupdate) console=ttyPA0,115200 loglevel=8 ubi.mtd=Pfactory ubi.mtd=Psystem ubi.mtd=Pupdate root=ubi1:system rootfs
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Memory: 335MB = 335MB total
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] Memory: 331332k/331332k available, 192956k reserved, 0K highmem
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] Virtual kernel memory layout:
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc0588690 (5634 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] .init : 0xc0589000 - 0xc05af780 ( 154 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] .data : 0xc05b0000 - 0xc05e76e0 ( 222 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.000000] .bss : 0xc05e7704 - 0xc066f6c8 ( 544 kB)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Additional per-CPU info printed with stalls.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] NR_IRQS:180
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] p7: IRQ setup
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] p7: tick setup
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.000000] p7: found Parrot7 chip v3 [0x50373032]
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] sched_clock: 32 bits at 390MHz, resolution 2ns, wraps every 11012ms
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.000000] Console: colour dummy device 80x30
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.150033] Calibrating delay using timer specific routine.. 1561.65 BogoMIPS (lpj=7808292)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.150059] pid_max: default: 32768 minimum: 301
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.150688] Mount-cache hash table entries: 512
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.151987] CPU: Testing write buffer coherency: ok
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.152500] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.152591] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.152774] Setting up static identity map for 0x8041dd98 - 0x8041ddcc
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.152787] p7: powering built-in self test off
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.152802] p7: setting L2C latencies to tag=00000020 data=00000020.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.152821] L310 cache controller enabled
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.152832] l2x0: 16 ways, CACHE_ID 0x410004c5, AUX_CTRL 0x72450801, Cache size: 524288 B
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.253030] CPU1: Booted secondary processor
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.402551] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.402707] Brought up 2 CPUs
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.402721] SMP: Total of 2 processors activated (3121.67 BogoMIPS).
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.403529] devtmpfs: initialized
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.407773] pinctrl core: initialized pinctrl subsystem
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.408000] dummy:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.408329] NET: Registered protocol family 16
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409002] Ram Oops registered with memory from 9ff00000-9fffffff
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409013] p7: machine setup
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409107] p7: registering p7-pinctrl.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409421] p7-pinctrl p7-pinctrl.0: loaded
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409440] p7: registering user_gpio.-1...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409485] p7: registering pl330-dma.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409564] amba pl330-dma.0: mapped microcode memory region [00100000:00101fff]
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409576] p7: registering p7-gpio.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409700] gpiochip_add: registered GPIOs 0 to 219 on device: p7-gpio
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409718] p7-gpio p7-gpio.0: GPIO driver initialized
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409733] Reading gp 138
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409751] p7: config pin 138 (ETH_RGMII_TXC__GPIO_138)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409792] > 1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409802] Reading gp 139
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409813] p7: config pin 139 (ETH_RGMII_TXD_00__GPIO_139)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409841] > 1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409848] Reading gp 140
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.409859] p7: config pin 140 (ETH_RGMII_TXD_01__GPIO_140)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409885] > 1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409893] **************** HARDWARE HW 10 ***********************
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.409901] **************** PCB REV 07 ***********************
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410482] p7: registering p7-i2cm.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410492] p7: install I2C_0_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410501] p7: install I2C_0_CLK__GPIO_064__I2C_0_SL_CLK I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410510] p7: install I2C_0_DAT I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410517] p7: install I2C_0_DAT__GPIO_063__I2C_0_SL_DAT I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410529] p7: registering p7-i2cm.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.410740] p7-i2cm p7-i2cm.0: controller probe successfully
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410762] p7: registering p7-i2cm.1 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410770] p7: install I2C_1_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410778] p7: install I2C_1_CLK__GPIO_062__I2C_1_SL_CLK I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410787] p7: install I2C_1_DAT I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410794] p7: install I2C_1_DAT__GPIO_061__I2C_1_SL_DAT I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.410805] p7: registering p7-i2cm.1...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.411074] p7-i2cm p7-i2cm.1: controller probe successfully
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.411242] p7: registering p7mu 0-0031...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.411256] p7: registering 0-0031 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.411265] p7: install REBOOT_P7MU I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.413236] gpiochip_add: registered GPIOs 220 to 224 on device: p7mu-gpio
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.413473] p7mu 0-0031: attached device v2 to I2C bus p7-i2cm.0
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413490] p7: registering px-uart.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413537] p7: registering px-uart.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413546] p7: install UART_0_RX I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413554] p7: install UART_0_RX__GPIO_055 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413562] p7: install UART_0_TX I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413570] p7: install UART_0_TX__GPIO_056 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413577] p7: install UART_0_RTS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413585] p7: install UART_0_RTS__GPIO_057 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413593] p7: install UART_0_CTS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413601] p7: install UART_0_CTS__GPIO_058 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.413613] hw_info : uart 0 rts/cts 1
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413803] p7: registering cast-nand.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413850] p7: registering cast-nand.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413859] p7: install NAND_NCE I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413868] p7: install NAND_NCE__GPIO_027__SPI_00a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413876] p7: install NAND_NR I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413884] p7: install NAND_NR__GPIO_028__SPI_01a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413892] p7: install NAND_NW I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413899] p7: install NAND_NW__GPIO_029__SPI_02a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413907] p7: install NAND_AL I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413914] p7: install NAND_AL__GPIO_030__SPI_03a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413922] p7: install NAND_CL I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413929] p7: install NAND_CL__GPIO_031__SPI_04a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413937] p7: install NAND_RNB I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413945] p7: install NAND_RNB__GPIO_032__SPI_05a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413953] p7: install NAND_DATA_00 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413960] p7: install NAND_DATA_00__GPIO_034__SPI_06a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413969] p7: install NAND_DATA_01 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413976] p7: install NAND_DATA_01__GPIO_035__SPI_07a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413985] p7: install NAND_DATA_02 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.413992] p7: install NAND_DATA_02__GPIO_036__SPI_08a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414000] p7: install NAND_DATA_03 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414008] p7: install NAND_DATA_03__GPIO_037__SPI_09a I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414016] p7: install NAND_DATA_04 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414024] p7: install NAND_DATA_04__GPIO_038 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414031] p7: install NAND_DATA_05 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414039] p7: install NAND_DATA_05__GPIO_039 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414047] p7: install NAND_DATA_06 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414054] p7: install NAND_DATA_06__GPIO_040 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414062] p7: install NAND_DATA_07 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414069] p7: install NAND_DATA_07__GPIO_041 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414077] p7: install NAND_DQS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414084] p7: install NAND_DQS__GPIO_033__CAN1_RXa I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414108] p7: registering p7-i2cm.2 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414116] p7: install I2C_2_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414123] p7: install I2C_2_CLK__GPIO_060__I2C_2_SL_CLK I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414132] p7: install I2C_2_DAT I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414139] p7: install I2C_2_DAT__GPIO_059__I2C_2_SL_DAT I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414150] p7: registering p7-i2cm.2...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.414491] p7-i2cm p7-i2cm.2: controller probe successfully
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414513] p7: registering p7_pwm.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414558] p7: registering p7_pwm.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414567] p7: install PWM_11 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414575] p7: install AAI_11__GPIO_130__PWM_11 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414583] p7: install PWM_08 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414590] p7: install PWM_09 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414598] p7: install AAI_09__GPIO_128__PWM_09 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414606] p7: install PWM_06 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414641] p7: registering switch-voltage.4...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414686] p7: registering acs3-sdhci.1...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414728] p7: registering acs3-sdhci.1 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414736] p7: install SD_1_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414744] p7: install SD_1_CLK__GPIO_015__UART_5_TX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414753] p7: install SD_1_CMD I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414760] p7: install SD_1_CMD__GPIO_016__UART_5_RX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414768] p7: install SD_1_DAT00 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414776] p7: install SD_1_DAT00__GPIO_017__UART_6_TX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414784] p7: install SD_1_DAT01 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414792] p7: install SD_1_DAT01__GPIO_019__UART_6_RX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414800] p7: install SD_1_DAT02 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414807] p7: install SD_1_DAT02__GPIO_018__UART_7_TX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414816] p7: install SD_1_DAT03 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414823] p7: install SD_1_DAT03__GPIO_020__UART_7_RX I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414836] p7: registering p7-spi.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414902] p7: registering p7-spim.1...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414943] p7: registering p7-spim.1 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414952] p7: install SPI_15 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414963] p7: registering spidev slave as spi1.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.414974] p7: registering p7-spis.3...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415013] p7: registering p7-spis.3 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415021] p7: install SPI_13b I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415028] p7: install SPI_12b I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415035] p7: install SPI_14b I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415046] p7: registering p7mu-adc master as spi3.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415055] p7: registering p7-temperature I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415063] p7: install GPIO_049 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415071] p7: install GPIO_049 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415078] p7: install GPIO_050 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415085] p7: install GPIO_050 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415093] p7: registering p7-temperature I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415101] p7: install GPIO_049 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415108] p7: install GPIO_049 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415115] p7: install GPIO_050 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415122] p7: install GPIO_050 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415162] p7: registering avi.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415225] p7: registering avicam.2...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415263] p7: registering avicam.2 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415272] p7: install CAM_2_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415279] p7: install CAM_2_DATA00 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415287] p7: install CAM_2_DATA01 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415295] p7: install CAM_2_DATA02 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415302] p7: install CAM_2_DATA03 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415310] p7: install CAM_2_DATA04 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415317] p7: install CAM_2_DATA05 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415325] p7: install CAM_2_DATA06 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415332] p7: install CAM_2_DATA07 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415343] p7: registering avicam.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415381] p7: registering avicam.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415390] p7: install CAM_0_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415398] p7: install CAM_0_HS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415405] p7: install CAM_0_VS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415413] p7: install CAM_0_DATA08 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415420] p7: install CAM_0_DATA09 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415428] p7: install CAM_0_DATA10 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415435] p7: install CAM_0_DATA11 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415442] p7: install CAM_0_DATA12 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415450] p7: install CAM_0_DATA13 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415457] p7: install CAM_0_DATA14 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415464] p7: install CAM_0_DATA15 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415472] p7: install CAM_0_DATA16 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415479] p7: install CAM_0_DATA17 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415487] p7: install CAM_0_DATA18 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415494] p7: install CAM_0_DATA19 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415504] p7: registering avi_r2r.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415541] p7: registering avi_m2m.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.415633] P7 GPU device PM registered.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.415677] Mali400 GPU registered.
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415685] p7: registering px-uart.1...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415725] p7: registering px-uart.1 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415733] p7: install UART_1_RX I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415741] p7: install UART_1_RX__GPIO_051 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415749] p7: install UART_1_TX I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415757] p7: install UART_1_TX__GPIO_052 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415764] p7: install UART_1_RTS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415772] p7: install UART_1_RTS__GPIO_053__CAN0_RXb I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415780] p7: install UART_1_CTS I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415788] p7: install UART_1_CTS__GPIO_054__CAN0_TXb I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.415800] hw_info : uart 1 rts/cts 1
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415933] p7: registering ci_hdrc.0...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415980] p7: registering ci_hdrc.0 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415990] p7: install ULPI_0_DATA00 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.415998] p7: install ULPI_0_DATA00__GPIO_095 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416006] p7: install ULPI_0_DATA01 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416014] p7: install ULPI_0_DATA01__GPIO_096 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416022] p7: install ULPI_0_DATA02 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416029] p7: install ULPI_0_DATA02__GPIO_097 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416037] p7: install ULPI_0_DATA03 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416045] p7: install ULPI_0_DATA03__GPIO_098 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416053] p7: install ULPI_0_DATA04 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416060] p7: install ULPI_0_DATA04__GPIO_099 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416068] p7: install ULPI_0_DATA05 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416076] p7: install ULPI_0_DATA05__GPIO_100 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416083] p7: install ULPI_0_DATA06 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416091] p7: install ULPI_0_DATA06__GPIO_101 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416099] p7: install ULPI_0_DATA07 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416106] p7: install ULPI_0_DATA07__GPIO_102 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416114] p7: install ULPI_0_NXT I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416122] p7: install ULPI_0_NXT__GPIO_103 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416130] p7: install ULPI_0_STP I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416137] p7: install ULPI_0_STP__GPIO_117 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416145] p7: install ULPI_0_DIR I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416153] p7: install ULPI_0_DIR__GPIO_104 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416160] p7: install ULPI_0_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416167] p7: install ULPI_0_CLK__GPIO_105 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416180] p7: registering ci_hdrc.1...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416221] p7: registering ci_hdrc.1 I/O pins...
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416230] p7: install ULPI_1_DATA00 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416238] p7: install ULPI_1_DATA00__GPIO_106__I2C_2_CLKa I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416246] p7: install ULPI_1_DATA01 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416254] p7: install ULPI_1_DATA01__GPIO_107__I2C_2_DATa I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416262] p7: install ULPI_1_DATA02 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416270] p7: install ULPI_1_DATA02__GPIO_108__I2C_2_CLKb I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416278] p7: install ULPI_1_DATA03 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416286] p7: install ULPI_1_DATA03__GPIO_109__I2C_2_DATb I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416294] p7: install ULPI_1_DATA04 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416302] p7: install ULPI_1_DATA04__GPIO_110__I2C_2_CLKc I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416311] p7: install ULPI_1_DATA05 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416318] p7: install ULPI_1_DATA05__GPIO_111__I2C_2_DATc I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416327] p7: install ULPI_1_DATA06 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416334] p7: install ULPI_1_DATA06__GPIO_112__I2C_2_CLKd I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416343] p7: install ULPI_1_DATA07 I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416350] p7: install ULPI_1_DATA07__GPIO_113__I2C_2_DATd I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416359] p7: install ULPI_1_NXT I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416366] p7: install ULPI_1_NXT__GPIO_114__I2C_2_CLKe I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416375] p7: install ULPI_1_STP I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416382] p7: install ULPI_1_STP__GPIO_116__I2C_2_DATe I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416391] p7: install ULPI_1_DIR I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416398] p7: install ULPI_1_DIR__GPIO_115 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416406] p7: install ULPI_1_CLK I/O pin function
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416413] p7: install ULPI_1_CLK__GPIO_118 I/O pin settings
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416448] p7: registering hx280-venc.0...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.416534] hw_info : i2c-1 device 0x0D : ak8963 ()
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416642] p7: registering ak8963 1-000d...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.416723] hw_info : i2c-1 device 0x77 : ms5607 ()
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416825] p7: registering ms5607 1-0077...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.416875] hw_info : i2c-2 device 0x68 : mpu6050 ()
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 0.416973] p7: registering mpu6050 2-0068...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.417021] hw_info : i2c-0 device 0x10 : mt9f002 ()
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.417142] hw_info : i2c-0 device 0x5D : mt9v117 ()
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.417244] hw_info : i2c-1 device 0x08 : BLDC ()
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.417366] Mykonos3 board : exporting HSIS to userspace in /sys/kernel/hsis
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.422622] hx280-venc.0 video memory [94f00000:9fefffff]
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.422633] Mykonos3 board : init done
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.422664] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.422676] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.426598] bio: create slab <bio-0> at 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.427782] SCSI subsystem initialized
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.427948] usbcore: registered new interface driver usbfs
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.428013] usbcore: registered new interface driver hub
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.428177] usbcore: registered new device driver usb
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.428277] Linux media interface: v0.10
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.428313] Linux video capture interface: v2.00
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.428456] sdhci1_bus_vdd: 3300 mV
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.429140] Switching to clocksource timer2
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.437072] NET: Registered protocol family 2
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.437426] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.438472] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.439843] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.440120] TCP: Hash tables configured (established 16384 bind 16384)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.440131] TCP: reno registered
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.440183] UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.440242] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.440573] NET: Registered protocol family 1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.441282] RPC: Registered named UNIX socket transport module.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.441294] RPC: Registered udp transport module.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.441302] RPC: Registered tcp transport module.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.441310] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.523497] NFS: Registering the id_resolver key type
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.525147] msgmni has been set to 647
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.526715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.526730] io scheduler noop registered
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.526739] io scheduler deadline registered
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.526870] io scheduler cfq registered (default)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.526879] start plist test
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.532169] end plist test
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.533344] cast-nand cast-nand.0: DMA mode enabled
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.533491] cast-nand cast-nand.0: pll_nand: 253500000Hz (wanted=256000000Hz mode=0)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.533809] cast-nand cast-nand.0: nand is benand
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.533849] NAND device: Manufacturer ID: 0x98, Chip ID: 0xa1 (Toshiba NAND 128MiB 1,8V 8-bit)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.533869] Scanning device for bad blocks
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 0.640759] Bad eraseblock 768 at 0x000006000000
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.676237] 5 cmdlinepart partitions found on MTD device nand0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.676248] Creating 5 MTD partitions on "nand0":
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.676262] 0x000000000000-0x000000800000 : "Pbootloader"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.676577] 0x000000800000-0x000001800000 : "Pmain_boot"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.676838] 0x000001800000-0x000002000000 : "Pfactory"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.677133] 0x000002000000-0x000005200000 : "Psystem"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.677397] 0x000005200000-0x000008000000 : "Pupdate"
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 0.677765] cast-nand cast-nand.0: pll_nand: 399750000Hz (wanted=400000000Hz mode=4)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678051] UBI: attaching mtd2 to ubi0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678063] UBI: physical eraseblock size: 131072 bytes (128 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678072] UBI: logical eraseblock size: 126976 bytes
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678079] UBI: smallest flash I/O unit: 2048
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678088] UBI: VID header offset: 2048 (aligned 2048)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.678096] UBI: data offset: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.712428] UBI: max. sequence number: 241
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718260] UBI: attached mtd2 to ubi0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718270] UBI: MTD device name: "Pfactory"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718278] UBI: MTD device size: 8 MiB
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718286] UBI: number of good PEBs: 64
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718293] UBI: number of bad PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718300] UBI: number of corrupted PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718307] UBI: max. allowed volumes: 128
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718313] UBI: wear-leveling threshold: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718320] UBI: number of internal volumes: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718327] UBI: number of user volumes: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718333] UBI: available PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718340] UBI: total number of reserved PEBs: 64
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718347] UBI: number of PEBs reserved for bad PEB handling: 2
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718355] UBI: max/mean erase counter: 9/7
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718362] UBI: image sequence number: 1090413656
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718386] UBI: background thread "ubi_bgt0d" started, PID 37
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718395] UBI: attaching mtd3 to ubi1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718403] UBI: physical eraseblock size: 131072 bytes (128 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718409] UBI: logical eraseblock size: 126976 bytes
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718415] UBI: smallest flash I/O unit: 2048
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718422] UBI: VID header offset: 2048 (aligned 2048)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.718428] UBI: data offset: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.901787] UBI: max. sequence number: 2117
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908043] UBI: attached mtd3 to ubi1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908052] UBI: MTD device name: "Psystem"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908061] UBI: MTD device size: 50 MiB
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908068] UBI: number of good PEBs: 400
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908075] UBI: number of bad PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908082] UBI: number of corrupted PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908089] UBI: max. allowed volumes: 128
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908096] UBI: wear-leveling threshold: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908103] UBI: number of internal volumes: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908110] UBI: number of user volumes: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908117] UBI: available PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908123] UBI: total number of reserved PEBs: 400
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908131] UBI: number of PEBs reserved for bad PEB handling: 4
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908139] UBI: max/mean erase counter: 14/9
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908146] UBI: image sequence number: 461910672
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908173] UBI: background thread "ubi_bgt1d" started, PID 38
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908181] UBI: attaching mtd4 to ubi2
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908189] UBI: physical eraseblock size: 131072 bytes (128 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908196] UBI: logical eraseblock size: 126976 bytes
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908202] UBI: smallest flash I/O unit: 2048
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908208] UBI: VID header offset: 2048 (aligned 2048)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 0.908215] UBI: data offset: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.107205] UBI: max. sequence number: 4248
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113473] UBI: attached mtd4 to ubi2
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113483] UBI: MTD device name: "Pupdate"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113491] UBI: MTD device size: 46 MiB
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113499] UBI: number of good PEBs: 367
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113506] UBI: number of bad PEBs: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113513] UBI: number of corrupted PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113520] UBI: max. allowed volumes: 128
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113527] UBI: wear-leveling threshold: 4096
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113534] UBI: number of internal volumes: 1
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113540] UBI: number of user volumes: 2
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113547] UBI: available PEBs: 0
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113554] UBI: total number of reserved PEBs: 367
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113561] UBI: number of PEBs reserved for bad PEB handling: 3
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113569] UBI: max/mean erase counter: 17/15
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113576] UBI: image sequence number: 1258656335
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 1.113603] UBI: background thread "ubi_bgt2d" started, PID 39
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113681] usbcore: registered new interface driver asix
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113730] usbcore: registered new interface driver cdc_ether
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113771] usbcore: registered new interface driver net1080
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113811] usbcore: registered new interface driver cdc_subset
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113875] usbcore: registered new interface driver cdc_ncm
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113884] Initializing USB Mass Storage driver...
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113977] usbcore: registered new interface driver usb-storage
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.113987] USB Mass Storage support registered.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.116175] ci_hdrc ci_hdrc.1: ChipIdea HDRC EHCI
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.116209] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.159215] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.159743] hub 1-0:1.0: USB hub found
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.159765] hub 1-0:1.0: 1 port detected
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.160394] file system registered
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.161686] gadget: Mass Storage Function, version: 2009/09/11
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.161699] gadget: Number of LUNs=1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.161710] lun0: LUN: removable file: (no medium)
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 1.161944] Gadget Android: controller 'ci_pdata' not recognized
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.161962] gadget: android_usb ready
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.161992] i2c /dev entries driver
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.162513] ulogger: created 256K log 'ulog_main'
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.162680] Serial: Parrot5/5+ UART driver $Revision: 1.19 $
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 1.162897] px-uart.0: ttyPA0 at MMIO 0x2100000 (irq = 91) is a PARROT5
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.450522] console [ttyPA0] enabled
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.454247] px-uart.1: ttyPA1 at MMIO 0x2110000 (irq = 92) is a PARROT5
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.461044] TCP: cubic registered
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.464523] NET: Registered protocol family 10
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.469738] NET: Registered protocol family 17
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.474049] Registering the dns_resolver key type
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.478820] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.524251] UBIFS: recovery needed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.583272] UBIFS: recovery deferred
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.586673] UBIFS: mounted UBI device 1, volume 0, name "system"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.592687] UBIFS: mounted read-only
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.596223] UBIFS: file system size: 48631808 bytes (47492 KiB, 46 MiB, 383 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.603876] UBIFS: journal size: 2412544 bytes (2356 KiB, 2 MiB, 19 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.611172] UBIFS: media format: w4/r0 (latest is w4/r0)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.616967] UBIFS: default compressor: none
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.621147] UBIFS: reserved for root: 2297000 bytes (2243 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.628241] VFS: Mounted root (ubifs filesystem) readonly on device 0:11.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.635066] Freeing init memory: 152K
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 3.669268] usb 1-1: new high-speed USB device number 2 using ci_hdrc
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.855726] UBIFS: completing deferred recovery
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 3.889045] UBIFS: deferred recovery completed
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 6.004167] p7-i2cm p7-i2cm.1: protocol error : SCL 2004
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 6.004184] p7-i2cm p7-i2cm.1: debug cmd : SDA(SB1) SCL(SB1P70) 6a0a
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 6.004195] p7-i2cm p7-i2cm.1: irq after transfert end, status 12004
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.776832] UBIFS: recovery needed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868779] UBIFS: recovery completed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868798] UBIFS: mounted UBI device 0, volume 0, name "factory"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868809] UBIFS: file system size: 6221824 bytes (6076 KiB, 5 MiB, 49 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868821] UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868831] UBIFS: media format: w4/r0 (latest is w4/r0)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868839] UBIFS: default compressor: none
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.868847] UBIFS: reserved for root: 293871 bytes (286 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 6.900101] UBIFS: recovery needed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003584] UBIFS: recovery completed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003602] UBIFS: mounted UBI device 2, volume 1, name "data"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003613] UBIFS: file system size: 10919936 bytes (10664 KiB, 10 MiB, 86 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003625] UBIFS: journal size: 1015809 bytes (992 KiB, 0 MiB, 6 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003635] UBIFS: media format: w4/r0 (latest is w4/r0)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003644] UBIFS: default compressor: none
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.003652] UBIFS: reserved for root: 515774 bytes (503 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.043916] UBIFS: recovery needed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175274] UBIFS: recovery completed
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175291] UBIFS: mounted UBI device 2, volume 0, name "update"
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175303] UBIFS: file system size: 32505856 bytes (31744 KiB, 31 MiB, 256 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175315] UBIFS: journal size: 1650688 bytes (1612 KiB, 1 MiB, 13 LEBs)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175325] UBIFS: media format: w4/r0 (latest is w4/r0)
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175333] UBIFS: default compressor: none
Jan 1 00:00:17 BebopDrone-K002732 user.notice kernel: [ 7.175342] UBIFS: reserved for root: 1535331 bytes (1499 KiB)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 7.382444] udev[201]: starting version 164
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 7.575126] Inserting bcm_dbus module
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 7.753607] wl: module license 'Proprietary' taints kernel.
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 7.753626] Disabling lock debugging due to kernel taint
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.240259] bcm_rpc_up: waiting to be connected
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.245657] bcm_rpc_buf_recv_mgn_high: Recvd:3 Version: 0x6257234
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.245663] State: 3 Session:105
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.245672] bcm_rpc_buf_recv_mgn_high: Reason: 0 Dongle Version: 0x6257234
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.245681] bcm_rpc_buf_recv_mgn_high: Connected!
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 8.260505] eth0: Broadcom BCMaa06 802.11 Wireless Controller 6.37.114.52 (r478150)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 8.260908] usbcore: registered new interface driver dbus_usbdev
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 8.698905] *** wlc_enable_mac(): Changing band 2 slot time from 20 to 25 (band default 20)
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 12.001640] *** wlc_enable_mac(): Changing band 2 slot time from 25 to 25 (band default 20)
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 12.004886] *** wlc_enable_mac(): Changing band 2 slot time from 25 to 25 (band default 20)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.384190] sdhci: Secure Digital Host Controller Interface driver
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.384207] sdhci: Copyright(c) Pierre Ossman
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.390599] mmc0: no vmmc regulator found
Jan 1 00:00:17 BebopDrone-K002732 user.debug kernel: [ 12.391303] Registered led device: mmc0::
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.469225] mmc0: SDHCI controller on acs3-sdhci [acs3-sdhci.1] using ADMA
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.521353] dma-pl330 pl330-dma.0: Loaded driver for PL330 DMAC-267056
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.521460] dma-pl330 pl330-dma.0: DBUFF-64x8bytes Num_Chans-6 Num_Peri-7 Num_Events-6
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.548718] p7mu-rtc p7mu-rtc: rtc core: registered p7mu-rtc as rtc0
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 12.571117] UMP: UMP device driver -v2.6.27-195020-ge1aee43 loaded
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.583778] hx280-venc hx280-venc.0: found hx280 video encoder (0x48313610).
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.616602] avi avi.0: Found AVI revision 3
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.620813] avi avi.0: AVI core driver initialized
Jan 1 00:00:17 BebopDrone-K002732 user.err kernel: [ 12.661160] avicam_dummy_dev avicam_dummy_dev.1: entity intialized, dummy
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.661196] avicam avicam.2: video device successfuly registered as video0
Jan 1 00:00:17 BebopDrone-K002732 user.err kernel: [ 12.668896] avicam_dummy_dev avicam_dummy_dev.0: entity intialized, dummy
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.669318] avicam avicam.0: stats video device successfuly registered as video2
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.669336] avicam avicam.0: video device successfuly registered as video1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.669472] registering avicam V4L2 subdevice nodes.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710034] avi_r2r avi_r2r.0: DebugFS enabled
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710682] avi_r2r avi_r2r.0: Found 3 channels
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710696] avi_r2r avi_r2r.0: Channel #0: r2r.0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710706] avi_r2r avi_r2r.0: Channel #1: r2r.1
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710715] avi_r2r avi_r2r.0: Channel #2: r2r.2
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.710879] avi_r2r Initialized
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.722222] avi_m2m avi_m2m.0: V4L2 device registered as video3
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.722400] avi_m2m avi_m2m.0: V4L2 device registered as video4
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.722541] avi_m2m avi_m2m.0: V4L2 device registered as video5
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.740221] p7-spi p7-spi.0: Loaded SPI revision 3
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.744946] p7-spis p7-spis.3: master is unqueued, this is deprecated
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745052] spi_master spi3: enabled device spi3.0 on slave core:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745058] half duplex/read/write
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745061] mode: single
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745064] clock: polarity=0 phase=0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745067] fifo: 32B/64B
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745070] buffer: [d3ad2800] 1152B (9 periods)
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.745161] p7-spis p7-spis.3: core 3 ready
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 12.754682] industrialio: module is from the staging directory, the quality is unknown, you have been warned.
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 12.758707] ring_sw: module is from the staging directory, the quality is unknown, you have been warned.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.759671] mmc0: new high speed DDR MMC card at address 0001
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.760341] mmcblk0: mmc0:0001 008GE0 7.28 GiB
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.760793] mmcblk0boot0: mmc0:0001 008GE0 partition 1 4.00 MiB
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.761232] mmcblk0boot1: mmc0:0001 008GE0 partition 2 4.00 MiB
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.762745] mmcblk0: unknown partition table
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.764602] mmcblk0boot1: unknown partition table
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.766329] mmcblk0boot0: unknown partition table
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.771015] p7mu-adc p7mu-adc: P7MU ADC - ready
Jan 1 00:00:17 BebopDrone-K002732 user.err kernel: [ 12.771336] P7MU SPI frequency corected to: 12000000 MHz
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.782998] p7-temperature p7-temperature: p7-temperature temperature sensor and ADC registered.
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795245] spi_master spi1: bus clock frequency set to 10000000Hz
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795268] spi_master spi1: enabled device spi1.0 on master core:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795272] full duplex/no read/write
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795276] mode: single
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795279] clock: polarity=0 phase=0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795282] fifo: 48B/64B
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 12.795379] p7-spim p7-spim.1: core 1 ready
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.484768] EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: discard,errors=continue,nobarrier,data=writeback
Jan 1 00:00:17 BebopDrone-K002732 user.err kernel: [ 14.806739] android_usb: already disabled
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.813669] mtp_bind_config
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.862114] android_work: did not send uevent (0 0 (null))
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.862162] ci_hdrc ci_hdrc.0: ChipIdea HDRC EHCI
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.862186] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.909278] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.909886] hub 2-0:1.0: USB hub found
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 14.909916] hub 2-0:1.0: 1 port detected
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 15.047453] Parrot7 GPU clocks started
Jan 1 00:00:17 BebopDrone-K002732 user.warn kernel: [ 15.097645] Mali: Mali device driver loaded
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 15.146267] fb0: Virtual frame buffer device, using 1024K of video memory
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140332] spi_master spi1: bus clock frequency set to 10000000Hz
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140355] spi_master spi1: enabled device spi1.0 on master core:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140360] full duplex/no read/write
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140364] mode: single
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140366] clock: polarity=0 phase=0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140369] fifo: 48B/64B
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140386] spi_master spi1: bus clock frequency set to 10000000Hz
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140402] spi_master spi1: enabled device spi1.0 on master core:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140407] full duplex/no read/write
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140410] mode: single
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140413] clock: polarity=0 phase=0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140416] fifo: 48B/64B
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140429] spi_master spi1: bus clock frequency set to 319410Hz
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140445] spi_master spi1: enabled device spi1.0 on master core:
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140449] full duplex/no read/write
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140452] mode: single
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140455] clock: polarity=0 phase=0
Jan 1 00:00:17 BebopDrone-K002732 user.info kernel: [ 17.140458] fifo: 48B/64B
No comments:
Post a Comment