Head over to the channel on YouTube for the latest videos
Wednesday, December 27, 2017
Tuesday, June 13, 2017
ImpulseRC Alien 4.5"
As mentioned in the previous post, I built an Alien 4.5" (from ImpulseRC)
Basically the 4" body but with the 5" arms, meaning 5" props but a smaller frame and different camera mount to what you see in Mr Steele and others builds
Soft mounted T-motor F40-II of course :)
Basically the 4" body but with the 5" arms, meaning 5" props but a smaller frame and different camera mount to what you see in Mr Steele and others builds
Soft mounted T-motor F40-II of course :)
Labels:
3D printing,
Alien,
Drone,
FPV,
fpvfreestyle,
ImpulseRC,
TMotor
Monday, June 12, 2017
5V for ImpulseRC Alien 4.5" (Pololu)
I built an ImpulseRC 4.5" Alien (4" body with 5" arms), and the stock PDB doesn't have a regulated 5V nor 12V.
So I bought a few 5V 1A Pololu regulators (D24V10F5) - which is code MCU-60198 from RobotGear (link here)
Put the pin headers in and place your wires:
You can see above, i've hot-glued the wires in which worked out great
The other option is an after-market PDB, but I like this solution
Labels:
Alien,
Drone,
FPV,
fpvfreestyle,
FPVRacing,
ImpulseRC,
Quadcopter
Monday, April 10, 2017
Bando session
A few quick batteries at an abandoned spot in Melbourne, unfortunately my Xaomi Yi HD camera failed a lot and I missed heaps of footage.. but some made it
See more at Instagram.com/Dronerant
See more at Instagram.com/Dronerant
Wednesday, February 8, 2017
DJI Mavic controller protector 3D printed
I couldn't resist and got a DJI Mavic.
The compactness is excellent, but in terms of protecting your sticks in the 'fly more combo' DJI back, you definitely need one of these:
Printed in soft and flexible TPU (Ninjaflex)
Design by BMSWeb, exact model here on Thingiverse
The compactness is excellent, but in terms of protecting your sticks in the 'fly more combo' DJI back, you definitely need one of these:
Printed in soft and flexible TPU (Ninjaflex)
Design by BMSWeb, exact model here on Thingiverse
Labels:
3D printing,
DJI,
Drone,
Mavic,
Ninjaflex,
Quadcopter,
Thingiverse
Wednesday, February 1, 2017
Epic bridge
Labels:
bridge,
Drone,
FPV,
fpvfreestyle,
FPVRacing,
Quadcopter
Monday, January 30, 2017
Automatic shark detection
Sharks are a natural hazard to surfers and beach goers, and the trusty old Westpac helicopter was ripe for disruption (huge cost, poor uptime, etc)..
So here it is, the Sentinel VDS system
The Sentinel VDS system leverages drone technology to capture live video footage with highly sophisticated detection software working autonomously to warn beach users if target shark species are detected
Pretty simple and likely effective.
Article on the guys here
So here it is, the Sentinel VDS system
The Sentinel VDS system leverages drone technology to capture live video footage with highly sophisticated detection software working autonomously to warn beach users if target shark species are detected
Pretty simple and likely effective.
Article on the guys here
Sunday, January 29, 2017
Soft mounting motors
Labels:
3D printing,
Drone,
FPV,
FPVRacing,
hype train,
Quadcopter,
soft mount
Saturday, January 28, 2017
More drone defence
More drone defence, this time on display at the world economic forum in Davos
Apparently it's a HP 47 Counter UAV Jammer from these guys
See article over at MIT Technology Review
Apparently it's a HP 47 Counter UAV Jammer from these guys
See article over at MIT Technology Review
Subscribe to:
Posts (Atom)